- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts
The NPort® 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A series becomes the world’s only device server with power consumption less than 1 W. The NPort® 5100A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5100A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
3-step Web-based Configuration
The NPort® 5100A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5100A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.
Easy to Troubleshoot
NPort® 5100A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.
NPort 5110A / NPort 5130A / NPort 5150A Series specificaties
Technology |
---|
Standards | IEEE 802.3 for 10BaseT |
| IEEE 802.3u for 100BaseT(X) and 100BaseFX |
| IEEE 802.3x for Flow Control |
Processing Type | Store and Forward |
Switch Properties |
---|
MAC Table Size | 1 K |
Packet Buffer Size | 512 kbit |
Interface |
---|
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode) |
Optical Fiber |
---|
Table | |
Power Requirements |
---|
Input Voltage | EDS-205: 24 VDC (12 to 48 VDC), single input |
| EDS-208 Series: 24 VDC (12 to 45 VDC), single input |
Input Current | EDS-205: 0.11 A @ 24 V |
| EDS-208: 0.12 A @ 24 V |
| EDS-208-M: 0.2 A @ 24 V |
Overload Current Protection | 1.1 A |
Connection | 1 removable 3-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics |
---|
Housing | Plastic |
IP Rating | IP30 protection |
Dimensions | EDS-205: 24.9 x 100 x 86.5 mm (0.98 x 3.94 x 3.41 in) |
| EDS-208 Series: 40 x 100 x 86.5 mm (1.57 x 3.94 x 3.41 in) |
Weight | EDS-205: 135 g (0.30 lb) |
| EDS-208 Series: 170 g (0.38 lb) |
Installation | DIN-rail mounting |
Environmental Limits |
---|
Operating Temperature | -10 to 60°C (14 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications |
---|
Safety | EDS-205: UL 508, EN 60950-1 |
| EDS-208 Series: UL 508 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV |
| IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m |
| IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV |
| IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV |
| IEC 61000-4-6 CS: 3 V |
| IEC 61000-4-8 |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) |
---|
Time | EDS-205: 3,915,945 hrs |
| EDS-208: 401,624 hrs |
| EDS-208-M-SC/ST: 368,353 hrs |
Standard | Telcordia (Bellcore), GB |
Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.
De mederwerkers zijn gecertificeerd op de volgende gebieden:
- IES-F1 Industrial Ethernet Foundations
- IES-L2 Layer-2 Networking
- IES-OM Operation & Maintenance



Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.
![]()

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.
Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.