- IEEE 802.15.4/ZigBee compliant
- Network topologies: Mesh/Star/Cluster tree
- 128-bit AES hardware encryption
- Enhanced surge protection for serial and power
- Dual DC power inputs (NPort Z3150 only)
- Easy-to-use configuration utility
The NPort Z2150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. An user-friendly utility is provided to configure the device type and network settings in simple steps.
Surge-protected Serial and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

NPort Z2150 Series specificaties
ZigBee Interface |
RF Standard | 802.15.4/ZigBee compliant |
Frequency Band | 2.4 GHz |
RF Data Rate | 250 kbps |
Rx sensitivity | -96 dBm |
Tx Power | 4.5 dBm (Max) |
Transmission Distance | Up tp 100 m (open space) |
Antenna | 2 dBi |
RF Channel | 16 channels |
Device Type | Coordinator, Router (NPort Z2150 only), End Device (NPort Z2150 only) |
Network Topology | Star, Mesh, Cluster tree |
Security | 128-bit AES encryption algorithms |
Hardware |
DIP Switch | Console/Operation Mode |
SW1 | Pull high/low resister, Termination for RS-422/485. |
Reset Button | Reset to default |
Serial Interface |
Number of Ports | 1 |
Serial Standards | RS-232/422/485 |
Connector | DB9 male |
Serial Line Protection | 1 kV surge protection |
RS-485 Data Direction Control | ADDC (Automatic Data Direction Control) |
Serial Communication Parameters |
Data Bits | 8 |
Stop Bits | 1, 2 |
Parity | None, Even, Odd |
Flow Control | RTS/CTS |
Baudrate | 50 bps to 230.4 kbps |
Serial Signals |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w | Data+, Data-, GND |
Software |
Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
Configuration | ZigBee Configuration Utility |
Firmware Upgrade | ZigBee Configuration Utility |
Physical Characteristics |
Housing | Aluminum |
Weight | 340 g (0.75 lb) |
Dimensions | Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in) With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) |
Environmental Limits |
Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 75°C (-40 to 167°F) |
Ambient Relative Humidity | 5 to 95% RH |
Power Requirements |
Input Voltage | 12 to 48 VDC |
Input Current | 45 mA @ 12 V |
Standards and Certifications |
Safety | UL 60950-1 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal:0.5 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs |
Radio | CE (ETSI EN 301 893, ETSI EN 300 328, ETSI EN 301 489-1-17, ETSI EN 301 489-1) |
Reliability |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
MTBF (mean time between failures) |
Time | 2,542,774 hrs |
Standard | Telcordia (Bellcore) Standard TR/SR |
Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.
De mederwerkers zijn gecertificeerd op de volgende gebieden:
- IES-F1 Industrial Ethernet Foundations
- IES-L2 Layer-2 Networking
- IES-OM Operation & Maintenance



Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.
Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.