nl
Inloggen
0

Er zijn nog geen producten in uw winkelwagen geplaatst.



Inloggen Registreer
X

Er zijn nog geen producten in uw winkelwagen geplaatst.

Neem contact op
Hulp nodig?
Live Chat
Let op! maandag 31 december 2018 zal IPC-Online gesloten zijn in verband met activiteiten, nieuwe bestellingen kunnen pas 2 januari 2019 verzonden worden! Excuses voor het ongemak.
Subcategorieën
Product filters
Gebruik de onderstaande filters om bij het juiste product uit te komen
0 poort
poorten
0
Onbeperkt
 


Bezig met laden...
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232
  • Rackmount model
  • 10/100BaseT(X)
  • ±48 VDC input
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 888,95 ex btw
(€952,21
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232/RS422/485
  • Rackmount model
  • 10/100BaseT(X)
  • 88 to 300 VDC power input
  • Wide temperature
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 1.478,95 ex btw
(€1583,83
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232/RS422/485
  • Rackmount model
  • 10/100BaseF(X) multi mode
  • SC connector
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 1.185,95 ex btw
(€1269,23
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232/RS422/485
  • Rackmount model
  • 10/100BaseF(X) single mode
  • SC connector
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 1.232,95 ex btw
(€1320,05
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232/RS422/485
  • Rackmount model
  • 10/100BaseT(X)
  • Wide temperature
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 1.276,95 ex btw
(€1554,79
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232
  • Rackmount model
  • 10/100BaseT(X)
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 818,95 ex btw
(€992,14
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 8 x RS232
  • Rackmount model
  • 10/100BaseT(X)
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 853,95 ex btw
(€1035,70
Incl btw)
Gratis verzonden
Levertijd : 2 week(en)
Eigenschappen
  • 16 x RS232/RS422/485
  • Rackmount model
  • 10/100BaseT(X)
  • Overzicht
  • Details
  • Specificaties
  • Downloads
  • Technische ondersteuning
  • Levering & garantie

Overzicht

Overzicht
  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Details

Product details

Specificaties

NPort 5610 / NPort 5630 Series specificaties
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
table
Serial Interface
Number of Ports 8 or 16
Serial Standards NPort 5610: RS-232
NPort 5630: RS-422/485
NPort 5650: RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kO, 150 kO (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate Supports standard baudrates (unit=bps):50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Android API Android 3.1.x and later
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5610-8: 2,290 g (5.05 lb)
NPort 5610-8-48V: 3,160 g (6.97 lb)
NPort 5650-8-S-SC: 2,440 g (5.38 lb)
NPort 5650-8-M-SC: 2,380 g (5.25 lb)
NPort 5650-8: 2,310 g (5.09 lb)
NPort 5610-16: 2,490 g (5.49 lb)
NPort 5610-16-48V: 3,260 g (7.19 lb)
NPor
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5610-8/16: 141 mA @ 100 VAC, 47 to 63 Hz
NPort 5630-8/16: 152 mA @ 100 VAC, 47 to 63 Hz
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Si
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5610-8: 877,888 hrs
NPort 5610-16: 666,105 hrs
NPort 5610-8-48V: 870,961
NPort 5630-8: 765,449 hrs
NPort 5630-16: 473,748 hrs
NPort 5650-8: 692,010 hrs
NPort 5650-16: 473,748 hrs
NPort 5650-8-S-SC: 678,053 hrs
NPort 5650-8-M-SC: 678,053 hrs
NPo
Standard Telcordia (Bellcore) Standard TR/SR

Downloads

Product downloads
Datasheet / Manual
Datasheet
Handleiding

Technische ondersteuning

Moxa certified engineers voor technische support
IPC-Online heeft mederwerkers met de titel Moxa Certified Engineer (MCE) in huis. Dankzij deze certificering kunnen de adviseurs onze klanten optimaal adviseren op het gebied van netwerkverbindingen.

De mederwerkers zijn gecertificeerd op de volgende gebieden:

  • IES-F1 Industrial Ethernet Foundations
  • IES-L2 Layer-2 Networking
  • IES-OM Operation & Maintenance

Certificaten
Het Moxa IES-F1 certificaat zorgt ervoor dat de medewerker op de hoogte is van alle basistechnieken van communicatieprotocollen binnen industriële netwerken. Het Moxa certificaat IES-L2 zorgt ervoor dat de medewerker volledig op de hoogte is van switch-technologie. Het bezitten van deze certificaten zorgt er voor dat er snelle terugkoppeling op pre- en aftersales mogelijk is. Daardoor kan er een totaaloplossing geboden worden en worden problemen snel opgelost. De IES-OM module draait om beheer en onderhoud van het netwerk, beiden essentieel voor een continu productieproces.

Levering & garantie

Levering
Verzendkosten:
Onze verzendkosten zijn altijd gratis boven een totaal bedrag van 50,00 euro. Bij een totaal bedrag onder de 50,00 euro hanteren we 7,50 verzendkosten.

Verzendwijze:
Wij versturen onze producten met de UPS, op het moment van verzenden krijgt u van ons een Track and Trace nummer zodat u de zending kunt volgen.
Betaling
Wij hebben diverse betaalmethoden waaronder iDEAL, MisterCash/Bancontact, Vooraf overmaken, Rembours, en op rekening. Wij bieden de mogelijkheid voor onze klanten om op rekening te betalen. Na controle door onze financiele afdeling zullen wij u informeren over de status van uw verzoek.
Garantie
Bij IPC-Online bent u verzekerd van 2 jaar garantie vanaf het tijdstip van aflevering, we doen er alles aan om u zo goed mogelijk te helpen. Mocht er onverhoopt toch iets mis zijn gegaan, dan lossen we dat direct voor u op. Bent u er niet zeker van of het defect onder de garantie valt, neem dan contact op met onze support afdeling of via telefoonnummer 033-3020012.
€ 937,95 ex btw
(€1137,34
Incl btw)
Gratis verzonden

Heeft u hulp of advies nodig?
Wij zijn 5 dagen per week beschikbaar
Ma t/m vr van 8:30 - 17:00 uur
Bel ons op
033-302 00 12
Stuur onze verkoop
een email
Technische ondersteuning
nodig?
Vul ons
contactformulier in
Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.