Er zijn nog geen producten in jouw winkelwagen geplaatst.
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |
Technology | |
---|---|
Standards | IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX | |
IEEE 802.3x for Flow Control | |
Processing Type | Store and Forward |
Switch Properties | |
MAC Table Size | Moxa EDS-205A: 1 K |
Moxa EDS-208A: 2 K | |
Packet Buffer Size | Moxa EDS-205A: 384 kbit |
Moxa EDS-208A: 768 kbit | |
Interface | |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
Fiber Ports | 100BaseFX ports (SC/ST connector, multi-mode, single-mode) |
DIP Switches | Enable/Disable broadcast storm protection |
Optical Fiber | |
Table | |
Power Requirements | |
Input Voltage | 12/24/48 VDC redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Input Current | Moxa EDS-205A: 0.09 A @ 24 VMoxa EDS-205A-M/S: 0.1 A @ 24 V |
Moxa EDS-208A: 0.11 A @ 24 V | |
Moxa EDS-208A-M/S: 0.11 A @ 24 V | |
Moxa EDS-208A-MM/SS: 0.15 A @ 24 V | |
Overload Current Protection | 1.1 A |
Connection | 1 removable 4-contact terminal block |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Housing | Aluminum |
IP Rating | IP30 protection |
Dimensions | Moxa EDS-205A Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) |
Moxa EDS-208A Series: 50 x 114 x 70 mm (1.96 x 4.49 x 2.76 in) | |
Weight | Moxa EDS-205A Series: 175 g (0.39 lb) |
Moxa EDS-208A Series: 275 g (0.61 lb) | |
Installation | DIN-rail mounting, wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Safety | UL 508 |
Hazardous Location | UL/cUL Class 1 Division 2 Groups A/B/C/D, |
ATEX Zone 2 Ex nA IIC T4 Gc | |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m | |
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV | |
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV | |
IEC 61000-4-6 CS: 10 V | |
IEC 61000-4-8 | |
Traffic Control | NEMA TS2 |
Rail Traffic | EN 50121-4 |
Marine | Moxa EDS-205A: DNV, GL, LR, ABS, NK |
Moxa EDS-208A: IEC 60945; Pending: DNV, GL, LR, ABS, NK | |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
MTBF (mean time between failures) | |
Time | Moxa EDS-205A Series: 3,040,784 hrs |
Moxa EDS-208A Series: 2,701,531 hrs | |
Standard | Telcordia (Bellcore), GB |